» »
Piping Design, System, Operation, Maintenance and Repair in Oil and Gas Plant » ME01

Piping Design, System, Operation, Maintenance and Repair in Oil and Gas Plant

Did you know you can also choose your own preferred dates & location? Customise Schedule
DateFormatDurationFees
10 Jun - 14 Jun, 2024Live Online5 Days$2250Register
16 Sep - 20 Sep, 2024Live Online5 Days$2250Register
09 Dec - 13 Dec, 2024Live Online5 Days$2250Register
DateVenueDurationFees
24 Jun - 28 Jun, 2024Dar Es Salam5 Days$4950Register
02 Sep - 06 Sep, 2024Nairobi5 Days$4950Register
23 Dec - 27 Dec, 2024Istanbul5 Days$5695Register

Book Classes Now


Book Online Class

Course Overview

What does a piping system include? A piping system consists of a network of pipes, fittings, flanges, valves and tanks that perform a specific function, i.e. to transfer fluid from one equipment to another.

Piping systems are the backbone of industries as they connect important processes through the supply of fluids needed for seamless operation. They also account for a significant amount of the total plant cost and investment.

The material to construct the piping system is carefully chosen basis the operation it is going to perform. Material suitability can be adjudged through various standard codes used to denote the quality and material of pipes and other fixtures used. Since these systems operate under various temperatures and pressures, they need to resist any possible damage from these conditions.

This Zoe training course will empower you with all the information and knowledge for choosing, setting up and managing piping systems. Given the importance of piping systems and the risks involved, trained experts in this would ensure greater opportunities for career progression.

Furthermore, since piping systems form the core of most operations in most industries, understanding the basics and all necessary information about these systems will ensure that you find ample job opportunities across industries.

Course Objectives

The primary objective of this Piping Design, System, Operation, Maintenance and Repair in Oil and Gas Plant training course is to empower professionals with—

  • detailed understanding and knowledge of plant piping systems, including their design, operation, maintenance and repair
  • the required awareness and knowledge of relevant codes and standards to choose the correct piping material
  • the experience to understand required operations and decide the best piping systems
  • adequate confidence and understanding to consider all challenges (including temperature and pressure) and work on setting up a system that could withhold these conditions
  • the knowledge and experience to train other professionals on essential aspects of piping systems
  • adequate knowledge and experience to understand what size and fittings are needed as per the intended purpose
  • the awareness and confidence to conduct regular inspections to check for maintenance and repair requirements, if any
  • understanding of the extent and type of damage and necessary remedial measures to address these
  • the skill and capabilities to reduce organisational costs on piping system maintenance and repair, thereby contributing to organisational development as well as worker safety

Training Methodology

Zoe Talent Solutions aims at having a healthy mix of theoretical and practical sessions in their training programs. The theoretical sessions are delivered by experienced professionals from the relevant domain, while group discussions, projects, role-plays and relevant case study discussions form part of the practical sessions.

Trainees also discuss relevant challenges they face in their current roles, which are elaborately discussed by the trainer.

The above-mixed format of training is a typical model followed by Zoe Talent Solutions and is called the Do–Review–Learn–Apply Model.

Organisational Benefits

By professionals enrolling for this Piping Design, System, Operation, Maintenance and Repair in Oil and Gas Plant training course, organisations will derive the following benefits:

  • Trained and experienced professionals undertaking responsibilities of choosing and setting up important piping systems
  • Regular maintenance and repair of piping systems through audits by trained professionals, thereby reducing maintenance and repair costs
  • Better safety to employees as they would work with safe, audited systems
  • Adherence to international standards and protocol for piping systems
  • Prevention of occupational hazards and huge business losses
  • Organisational growth and development because of better equipment and more secure operations
  • Greater investments because of increased credibility as a result of safer operations
  • Regular training of employees on best practices and understanding of standards and codes for optimal usage
  • Appropriate material and fitting selection for piping systems as per the intended use

Personal Benefits

Professionals enrolling for this Piping Design, System, Operation, Maintenance and Repair in Oil and Gas Plant training course will derive the following benefits:

  • Detailed knowledge and understanding of piping systems, including their designs, operation, maintenance and repair
  • Increased confidence and experience to train other professionals on best practices for managing piping systems
  • Better comprehension and skill to choose the appropriate piping system as per the intended purpose
  • Greater understanding and knowledge of acceptable standards and codes to make the right choice of material and fittings
  • Enhanced skill and capabilities to save organisational costs of maintenance and repair through regular audits of piping systems
  • Increased understanding and knowledge to ensure that piping systems are as per the standards and safety norms required internationally, thereby contributing to worker safety
  • Greater ability to predict challenges and risks and ensure that these are taken care of to avoid occupational hazards
  • Enhanced skill, capabilities and perspective to undertake higher roles and responsibilities related to piping systems in any industry, thus increasing avenues for growth and progression

Who Should Attend?

  • Senior members of an organisation responsible for making critical decisions related to purchases and costs for piping systems and material
  • Piping engineers responsible for ensuring that all systems are running as per optimal levels
  • Supervisors and managers responsible for overseeing maintenance, operation and repair of piping systems
  • Operations managers who need to manage end-to-end operations of the plant
  • Quality auditors and compliance officials responsible for checking maintenance of optimal quality and adherence to standards
  • Vendors involved in supply of material and fixtures for piping systems
  • Any other professional interested in knowing more about piping systems

Course Outline

The Piping Design, System, Operation, Maintenance and Repair in Oil and Gas Plant course covers the following areas for effectively understanding plant piping systems:

Module 1 – Power Plant Piping Material

  • Steel
  • Cast iron
  • Brass and copper

Module 3 – Types of Pipe Fittings

  • Elbows
  • Nipples
  • Couplings
  • Unions
  • Tees and crosses
  • Y-bends
  • Return bends
  • Plugs and caps
  • Bushings
  • Reducers

Module 4 – Methods to Connect Pressure Piping

  • Screwed connections
  • Flanged connections
  • Welded joints

Module 5 – Ideal Design Procedure

  • Determination of the problem
  • Determination of preliminary pipe route
  • Pipe diameter determination based on allowable headloss
  • Structural analysis
  • Support and anchor designing
  • Preparation of drawings, specification, design report

Module 6 – Piping System Design Engineering

  • Design basis and standard drawings
  • Piping material specifications
  • Pipe and pump sizing
  • Equipment datasheet preparation
  • Catalogue creation
  • Plot plan
  • Fire protection system

Module 7 – Types of Valves in Pipe System Design

  • Air-relief valves
  • Gate valves
  • Small valves
  • Altitude valves
  • Pressure-regulating valves

Module 8 – Types of Fire Hydrants in Piping Systems

  • Flush hydrants
  • Wall hydrants
  • Post hydrants

Module 9 – Piping Flexibility Analysis

  • Stress analysis model
  • Analysis-formatted report with recommendation
  • Stress isometric
  • Load list for support design
  • Support design

Module 10 – Maintenance Checklist

  • Determine points of inspection
  • Develop a schedule for the maintenance team
  • Implement a preventative maintenance schedule
  • Perform upgrades and rehabilitation tasks

Module 11 – Benefits of Preventative Maintenance

  • Better uptimes
  • Fewer repairs and shutdowns
  • Increased energy savings
  • Lower repair costs

Module 12 – Parameters Guiding Choice of Repair Techniques

  • Piping geometrics and material
  • Operating characteristics
  • Configuration and location
  • Nature and size of the defect to repair

Module 13 – External Repair Techniques

  • Cut out and replace
  • Bypass technique
  • Grinding
  • Weld deposition
  • Metallic sleeves
  • Composite sleeve

Generate Invoice For This Course

Click here to auto generate invoice for this course

Generate Invoice
Want this Course for your Organisation?

Get a free proposal to conduct this course in your organisation as an in-house basis

Get In-house Quote
Information Request

If you've any questions, Let us know by clicking the button below.

Quick Enquiry
Free Courses offer
Note

Customized Schedule is available for all courses irrespective of dates on the Calendar. Please get in touch with us for details.